IQ Power Tools iQ426HEPA, Руководство оператора

Страница: 7 / 27

iQ426 HEPA
Operator’s Manual
888-274-7744
www.iqpowertools.com
En
gli
sh
1.4
anything that may reduce airflow.
• Keep hair, loose clothing, fingers and all parts
of body away from openings and moving parts.
• Use extra care when cleaning on stairs.
• Do not use the product without filters in
place. Replace filters as described in this
manual. It is highly recommended to use dust
bags for collection, containment and proper
disposal of dust.
• Always perform daily maintenance before
starting the machine.
• Do not overload the machine. Overloading
can damage the machine.
• Keep all parts in good working order and
ensure that all fixtures are properly tightened.
Replace all worn or damaged decals.
• Never leave the machine unsupervised with
the motor running.
• Observe care when lifting. You are handling
heavy parts, which imply the risk of pinch
injuries or other injuries.
ELECTRICAL SAFETY
WARNING! There is always a risk of shocks from
electrically powered machines. Avoid unfavourable
weather conditions and bodily contact with lightning
conductors and metal objects. Always follow the
instructions in the Operator’s manual to avoid damage.
• Before using the dust extractor make
sure that the power & voltage corresponds
with the voltage shown on the machines rating
plate, including extension cords.
• Never connect the machine to an
outlet if plug or cord is damaged.
• Check that the main voltage corresponds
with that stated on the rating plate on
the machine.
• Inspection and/or maintenance should be
carried out with the motor switched off and
the plug disconnected.
• Always shut down the machine before
disconnecting the power plug.
• Never drag the machine by means of the cord
and never pull out the plug by pulling the cord.
Hold the plug to disconnect the power cord.
• Never use the machine if any cable or plug
is damaged, but hand it in to an authorized
service workshop for repair.
• Prevent unintentional starting of the motor.
WARNING!
WHEN CLEANING THE MACHINE
MAKE SURE TO AVOID WATER
ENTERING THE ELECTRICAL SYSTEM AND THE MOTOR
UNIT. WATER CAN CAUSE DAMAGE TO THE MACHINE OR
SHORT CIRCUIT.
SAFETY
WARNING!
THE MACHINE CAN BE A
DANGEROUS TOOL IF USED
INCORRECTLY OR CARELESSLY, WHICH CAN CAUSE
SERIOUS OR FATAL INJURY TO THE OPERATOR OR OTHERS.
WARNING!
UNAUTHORIZED MODIFICATIONS
AND/ OR ACCESSORIES MAY LEAD
TO SERIOUS INJURY OR DEATH TO THE USER OR OTHERS.
WARNING!
IMPROPER CONNECTION CAN
RESULT IN THE RISK OF ELECTRIC
SHOCK. CONTACT A QUALIFIED ELECTRICIAN IF IN DOUBT AS
TO WHETHER THE APPLIANCE IS PROPERLY GROUNDED.
NOTICE!
GOOD MOTOR PERFORMANCE
DEPENDS ON PROPER VOLTAGE.
EXTENSION CABLES THAT ARE TOO LONG AND/OR HAVE
A GAUGE THAT IS TOO SMALL, REDUCE POWER TO THE
MOTOR UNDER LOAD, RESULTING IN REDUCED OUTPUT
OR MALFUNCTIONS.
Ensure the power switch is in the OFF -
position before connecting the machine to
a power source.
• Do not modify the plug. If it will not fit the
outlet, have a proper outlet installed by a
qualified electrician. Make sure local
regulations and ordinances are followed.
An under sized extension cord will cause a drop in line
voltage, resulting in loss of power and overheating.
Use only three-wire outdoor extension cords that have
three-prong grounding plugs and grounding receptacles
that accept the appliance’s plug.
CAUTION!
LONG TERM EXPOSURE
TO NOISE CAN RESULT IN
PERMANENT HEARING IMPAIRMENT. ALWAYS USE
APPROVED HEARING PROTECTION.
WARNING!
THERE IS ALWAYS A RISK
OF CRUSH INJURIES WHEN
WORKING WITH PRODUCTS CONTAINING MOVING PARTS.
WEAR PROTECTIVE GLOVES TO AVOID BODY INJURIES.