IQ Power Tools iQ426HEPA, Руководство оператора

Страница: 19 / 27

iQ426 HEPA
Operator’s Manual
888-274-7744
www.iqpowertools.com
En
gli
sh
Press the sides of the HEPA cover inward and
lift up cover.
Remove filter by pulling the filter corners. Replace the
filter with a new HEPA filter.
Push all sides and corners of new filter into the filter
housing. Close HEPA filter cover.
8.1
DUST DISPOSAL
Disposal
Obey the local recycling requirements and applicable
regulations. When the product no longer is being used,
discard it at a recycling location.
DUST DISPOSAL
Each iQ426HEPA will come out of the box with 3 bags.
The bags come with an attached tie to ensure closure
when disposing of dust. Replacement bags are available
to purchase with your dealer or at iqpowertools.com.
DUST TUB COLLECTION BAG INSTALLATION
Install bag, hooking band over tub lid then push bottom
of bag to the bottom of tub.
Check that vent holes are 2-3 inches from top lip.
To remove bag release band and seal with plastic tie.