background image

?

DID YOU KNOW...

IQ products are designed and manufactured to give many

years of trouble-free service.

The materials used during manufacture have been

selected to allow the product to be easily recycled when

no longer functional. 

Waste electrical products should not be disposed of with

household waste. Please recycle where facilities exist.

Check with your Local Authority or retailer for recycling

advice

LIGHT POLLUTION & CONSIDERATE LIGHTING

Please be aware of the annoyance over-lighting an area

can cause to your immediate neighbours.

Light pollution caused by incorrectly installing a unit or

over-lighting an area can be limited by carefully considering

the location and position of your unit before installation. The

light spread on all halogen floodlights can be reduced by

angling the floodlight downwards on the mounting bracket.

This will also concentrate the light on your property and

limit the potential inconvenience of the light shining into

your neighbours windows etc. 

Please see 

Selecting a Location

for information on

choosing the optimum location for your security light.

SF-ATS-PAR38S-B.qxd  16/05/2005  11:23  Page 9

Содержание E-680










Отзывы: