IPS GROUP, Inc.
– SSPM User Manual (Ver. 3.2)
All information contained herein is considered confidential
29
B. Error Status Codes
The following error codes may be displayed in the
FAULTS
menu when the meter is
placed in Diagnostic Mode:
Battery Low
– appears when the meter’s battery drops below 4000 mV
Card Stuck
– indicates an object inserted into the card reader
Coin Path Blocked
– indicates an object obstructing the path of the coin or the validator
not being present
OSC Fault
– appears when a coin is detected but is not validated
Time or Config error
– the time on the meter is off by a more than 24 hours or the
configuration on the meter is incorrect
The following error codes may be displayed during a communication session in the
COMMS TEST
menu when the meter is placed in Diagnostic Mode:
GSM Not Found
– meter cannot communicate with the GSM radio
CME ERROR 10
– SIM not inserted
CME ERROR 107
– GPRS service not allowed
CME ERROR 553
– context already activated
CME ERROR
555
– activation failed
CME ERROR 557
– cannot setup socket
CME ERROR 559
– time out in opening socket
