iPOWER TPD-800A User Manual
16
2) According to the setting of the SNMP on the IE browser interface, TRAP information will be sent to Trap
Destination automatically, the time information of alarm, device name and the alarm type will be included in the
TRAP information. Overview of the TRAP information as below:
Minor 11/17/2009 11:07:56 device
thresholdAlert
[1] unitName.0 (DisplayString): total load
[2] deviceName.0 (DisplayString): device1
[3] alertStatus.0 (DisplayString): load low
[4] alertValue.0 (DisplayString): 7.2
[5] lowLimit.0 (DisplayString): 10.0
[6] highLimit.0 (DisplayString): 16.0
[7] pollLastState (Integer): unk
2.3.
SSH command line console access
SSH(Secure Shell) is kind of protocol which provide telnet and other secure network service through unsafe
network. Besides the configuration of safe network terminal conversation and power management, SSH
conversation can also be employed to safe direct connecting devices.
The configuration and client of SSH require using the PC client agent, lots of free shared software like PUTTY are
available or user can buy the SSH client in the market.
The SSH monitor, control and manage the device mainly through command line like STATUS ON OFF
、
REBOOT
、
SHOW
、
SET
、
ADD
、
REMOVE
、
RESET
、
RESTART
、
QUIT
1)
. STATUS
"STATUS" command line can be used to view the basic information of devices, status of total output, individual
output and sensor; the format of command line: STATU
【
ADDRESS
】【
OPTION
】
【
ADDRESS
】：
the series number of connected device, view the current status of device according to the series
number;
【
OPTION
】
: View the device information according to the options, as detailed in Figure 3-1
Figure 3-1 the description table of STATUS OPTION
【
OPTION
】
Description
SUMMARY
View the basic information of device, e.g device series, model, series number,
output quantity, total load current, total voltage, and power consumption
OUTPUTS
View all the output numbers, switch on/off status, threshold of individual and total
