iPOWER TPD-800A User Manual
26
Note:
A. The daisy-chain device hold the unique hardware series number
B. The name can not be repeat when name the new added device.
IV. Restore the network configuration
Restore the network configuration of hardware, restore IP address, sub-net mask, default gateway, DNS setting, SSH,
Telnet, HTTP to factory settings, for the original default values please refer to the 4
th
page of IE browser, the method
of restoring by network are as below:
A. Connected the device and PC directly with network cable, namely network direct connection, rotate "OUTLET
NO.1" knob on the front panel to “U”
B. Set up the device as Mater (the Slaves can not be restored)
C. Press knob of "OUTLET NO.2 for 30 seconds (the interval of RUN light is 2 seconds), the digital tube will
display the RES IP;
D. PC interface will automatically connect after the network disconnected.
4. Frequently Asked Questions
1.
Q: User can not monitor the device information after logging on to the administrator interface.
A: 1, Check the device series number through "Device Configuration" interface, make sure the device series number
is exactly the same with the hardware;
2, Check whether the hardware device is the Master or not, the Slaves can not be monitored when single device
connected to network, multiple devices daisy-chain, set up one device to be Master, others to be Slaves;
2.
Q: Forget the login IP address
、
user name or password?
A: Press the knob of "OUTLET NO.2 for 30 seconds to restore it to factory setting, when restore complete the IP will
be: 192.168.1.163; User name is adm; password is adm, these user name and password can be used only once, other
user administration will not be affected when restore to the original factory setting.
3. Q: E-mail delivery failure?
A: 1. Check and make sure the network are connected and function well;
2. Check whether the DNS setting is successful or not;
3. Check and make sure the pop and smtp server was filled in correctly and accordant with server of e-mail sender, the
smtp port is right
4. Ensure all the information filled in frame is accurate.
