iPOWER TPD-800A User Manual
14
c)
Click "Update"
d)
Return to prompt information automatically when file submitting successfully (letters in blue), which means the
update document submitted successfully.
e)
Waiting for the system pop the login window after software system initialized when file submit successfully.
Note:
Make sure no power failure, no network disconnected and no operation on the interface when upgrading
14)
User manage
Create or delete user account and configure user's right, details as below:
a)
The administrator can add 5 users at most. The user name can only be made up of letters, number and underline;
other character can not be filled in.
b)
Administrator can open the "Edit" which under the Action menu to modify the password and lever of all the
users.
c)
Administrator can delete users, but the last administrator can not be deleted.
d)
Administrator can open the "Edit" which under the "Control Rights" menu to view and assign the user's right, the
administrator holds all the right.
Note:
General user can only monitor and manage the assigned devices status, sensor status, device configuration
information, network configuration, power on/off automatically, limiting value to alarm setting, alarm setting, daily
record information and so on.
15)
Restart
"Restart" interface is designed to restart and refresh the device software system (e.g. Change the IP address, HTTP
port, Telnet port, software update), no need to cut off the power supply as this operation does not affect the normal
power supply. The system will automatically pop the login window when system restart.
16)
Logout
According to the prompt message to close the software system interface`
2.2.
SNMP Access Method
SNMP(Simple Network Management Protocol), this software support the V2 version of SNMP with a MIB file
which contain an enterprise number, network management system offer network management of device through
SNMP, the user can change the output port name, view the device and sensor status, receive alarm information
through SNMP approach.
The user has to open the SNMP access method through visiting interface of IE browser, please refer to the 13
th
item
of IE access method SNMP introduction. Install corresponding SNMP management software after completing the
SNMP start setting, set up the configuration according to the software menu provided by SNMP software company,
