IPG Interpack ET 2Plus H275 Скачать руководство пользователя страница 7

Страница: 7 / 78

R00

AFETY

SSUES

There are two safety labels used on all Interpack Tape Heads. One label is placed on the Tape

Head knife guard to warn operators and service personnel of the sharp cutting edge of the blade.

The other is on the side frame warning of pinch points within the tape head. Please read the

labels and the following safety precautions before using the Tape Head.



Read this manual for other important safety operating and service information.



Only trained personnel are to operate and service Tape Head.



Wear safety glasses.



Shut off power to machine before adjusting.



Unplug electrical power before servicing.



All covers and guards must be in place before operating.



Stay clear of moving parts which can shear and cut.



Never operate the Tape Heads with the Knife Guard removed.



Turn electrical supply off before servicing the Tape Heads, including tape loading

and threading.

Note: Should any of the safety labels placed on the Tape Head be

damaged or destroyed, replacements are available.

Содержание Interpack ET 2Plus H275















































































Результаты поиска

Содержание Interpack ET 2Plus H275

Отзывы:

Бренды по названию

Популярные бренды

IPG Interpack ET 2Plus H275, Руководство оператора и список запчастей

Результаты поиска

Содержание Interpack ET 2Plus H275

Отзывы:

Бренды по названию

Популярные бренды