IPG Interpack ET 2Plus H275 Скачать руководство пользователя страница 5

 

 

5

   

 

 

 

 

 

 

 

 

R00

 

W

ARRANTY

 

E

QUIPMENT WARRANTY AND LIMITED REMEDY

:  The following warranty is made in lieu of all other 

warranties, express or implied, including, but not limited to, the implied warranty of 

merchantability, the implied warranty of fitness for a particular purpose, and any implied 

warranty arising out of a course of dealing, a custom or usage of trade: 

 

Intertape sells its Interpack Tape Heads, Case Tapers and Case Erectors with the following warranties: 

1.  The ET 2Plus Tape Heads' knife blades, springs and wipe down rollers will be free from all 

defects for a period of ninety (90) days. 

2.  All other ET 2Plus Tape Head parts will be free from all defects for one (1) year after delivery. 

3.  Water Activated Tapers’ blades and brushes will be free from defects for ninety (90) days after 

delivery 

4.  Drive Belts will be free from defects for ninety (90) days after delivery 

5.  The Gear Motors will be free from defects for one (1) year after delivery. 

6.  All other components will be free from defects for one (1) year after delivery. 

 

If any part is proven defective within its warranty period, then the exclusive remedy and 

Intertape's and the seller's sole obligation shall be, at Intertype’s option, to repair or replace 

the part, provided the defective part is returned immediately to Intertape's factory or an 

authorized service station designated by Intertape. 

 

A part will be presumed to have become defective after its warranty period unless the part is 

received or Intertape is notified of the problem no later than five (5) calendar days after the 

warranty period. 

 

If Intertape is unable to repair or replace the part within a reasonable time, then Intertape, at its 

option, will replace the equipment or refund the purchase price.  Intertape shall have no 

obligation to install the repaired or replacement part. 

 

Intertape shall have no obligation to provide or pay for the labor required to install the repaired 

or replacement part.  Intertape shall have no obligation to repair or replace (1) those parts 

failing due to: operator misuse, carelessness, or due to any accidental cause other than 

equipment failure, or (2) parts 

 

1.  Failure or damage is due to misapplication, lack of proper maintenance, 

abuse, improper installation or abnormal conditions such as temperature, 

moisture, dirt or corrosive matter, etc. 

2.  Failure due to inadequate cleaning, improper operating environment, improper 

utilities or operator error. 

3.  Failure due to operations above the rated capacities, or in any other improper 

manner, either intentional or otherwise. 

4.  Failure is due to equipment, which has been altered by anyone other than an 

authorized representative of Intertape Polymer Group. 

5.  Failure is due to an attempt by the purchaser to correct alleged defective 

equipment.  In this event the purchaser is responsible for all expenses 

incurred. 

 

L

IMITATION OF LIABILITY

:  Intertape and seller shall not be liable for direct, indirect, special, 

incidental or consequential damages based upon breach of warranty, breach of contract, 

negligence, strict liability or any other legal theory. 

 

The foregoing Equipment Warranty and Limited Remedy and Limitation of Liability may be 

changed only by written agreement signed by authorized officers of Intertape and seller.

Содержание Interpack ET 2Plus H275















































































Отзывы: