28
Examples of the Telephone Display (cont.)
When you press the INFO/MUTE key while the handset is onhook and the telephone is
not in speakerphone mode, your name and IP address are displayed for a few
seconds.
25213
[#] [Menu]
This is displayed when you start entering a telephone number while the handset is
offhook or the telephone is in speakerphone mode. The call is not actually placed until
you press the # or DIAL/REDIAL key after entering the telephone number. Note that, in
order to place a call with a telephone number (rather than, for example, a SIP URL
through the configuration menu), you must have previously specified a SIP proxy or
registrar on the servers page of the configuration web site (see the section, Servers).
Pressing the MENU/HANGUP key before you place the call causes the telephone to
ignore the telephone number and to display the phonebook. You may then select an
entry from your phonebook.
Ringer Volume:
XXX----|
This is displayed when you adjust the ringer volume with the VOL keys while the
handset is onhook and the telephone is not in speakerphone mode. The bar graph
indicates the resulting volume setting.
This indicates that you have placed the call on hold by pressing the DND/HOLD key.
On hold with:
John Doe
John Smith
10.0.0.167
Speaker Volume:
XXXXX--|
This is displayed when you adjust the speaker volume with the VOL keys while the
handset is offhook or the telephone is in speakerphone mode. The bar graph indicates
the resulting volume setting.
