43
Basic Operation (cont.)
Mute
To mute your microphone, press the INFO/MUTE key; to unmute, press the INFO/MUTE
key again. An
m
in the upper-right-hand corner of the LCD display indicates that the call
is muted.
Hold
Press the DND/HOLD key to place a call on hold and again to take it off of hold. The LCD
display says,
On hold with:
followed by the Caller ID (CID) when the call is on
hold. Placing a call on hold effectively mutes the microphone on both your and the other
party’s telephone. However, one advantage that this has over simply muting the
microphones is that it reduces the amount of data transferred between telephones to
virtually nothing.
Phonebook Dialing
To dial an entry in your phonebook, pick up the handset or press the SPEAKER/
HEADSET key, press the MENU/HANGUP key, scroll up and down in the phonebook
using the VOL keys, and then dial the currently displayed entry using the DIAL/REDIAL
key.
Caller ID (CID)
The ID of the caller is displayed in the LCD during a call and before you have answered
an incoming call. Depending on what information is provided by the caller’s telephone,
one of the following is displayed: name, nickname, domain name, or network address.
Do Not Disturb (DND)
To change your DND setting, first make sure the handset is onhook and the telephone is
not in speakerphone mode. To enable DND, press the MENU/HANGUP key, select
Settings
, select
Do not disturb
, select
Do not disturb
again, then select
Yes
. The text,
Do not disturb
, in the bottom line of the LCD display indicates that
DND is enabled. To disable DND, follow the same procedure except select
No
instead of
Yes
.
Forwarding Calls
To have all incoming calls automatically forwarded to a SIP URL you specify, first make
sure the handset is onhook and the telephone is not in speakerphone mode. Press the
MENU/HANGUP key, select
Settings
, select
Phone Settings
, select
Forward
,
select
Set Forward
, then enter the SIP URL to where you want incoming calls
forwarded and press the SET/CONF key. Select
Forward on busy
if you wish to
forward all calls only if your telephone is busy. The text,
Forwarding
, in the bottom
line of the LCD display indicates that incoming calls are forwarded. To cancel
forwarding, follow the same procedure except
Cancel Forward
is displayed in
place of
Set Forward
. At that point, select
Cancel Forward
, then select
Yes
.
Call Return
This feature enables you to callback the last caller. For example, if you missed a call
because you couldn’t get to the telephone in time, use this feature to automatically call
the person you missed.
