ipDatatel BAT-CDMA-WIFI, Руководство по установке

Страница: 12 / 32

Basic Programming
The BAT-CDMA-WIFI emulates telephone service (dial-tone) to the
panel. Programming for the alarm control is limited to configuring the
signal format as Contact ID, as well as inputting a telephone number to
dial. In this case, the actual telephone number does NOT matter and is
NOT used in the signal delivery process.
Virtual Keypad Programming
For panels that are “Interactive Ready” (See Supported Panels section
page 26-27) the following programming will provide full-feature virtual
keypad access allowing the customer to enter their code to arm &
disarm the system by way of utilizing the SecureSmart
TM App and web
interfaces.
Panel Type Programming
DSC No programming required to make the virtual keypad operate.
Honeywell Enable *193 with (1,0) to turn on Address 20. Note: insure that
Address 20 is available.
GE Automatically enroll to Keypad Slot (Expansion 240) once you enter
and exit programming.
Dual-Path Alarm Communicator - Installation Guide ............................................... Page 12