300 Mbps In-Wall Access Point
User Guide
10.7
Device Reboot
This module enables you to manually reboot the AP or configure the AP to automatically reboot.
When the AP reboots, all connections are released. You are recommended to reboot the AP at an idle hour.
10.7.1
Device Reboot
If a setting does not take effect, you can try rebooting the AP to resolve the problem.
Procedure:
1.
To access the page, choose
Tools
>
Reboot
.
2.
Click
Reboot
.
---End
10.7.2
Time Reboot
This function enables the AP to automatically reboot as scheduled. You can use this function to prevent
wireless performance degradation or network instability that occurs after a long AP uptime. The AP can
reboot:
−
As intervals
: In this mode, the AP reboots at the interval that you specify.
−
As Scheduled
: In this mode, the AP reboots weekly at the time that you specify.
Configuring the AP to Reboot at an Interval
1.
Choose
Tools
>
Reboot
and click the
Time Reboot
tab.
2.
Select the
Enable Auto Reboot
check box.
3.
Set
AUTO Reboot Type
to
As Interval
.
4.
Set
Reboot
Interval
to a value in minutes, such as
1440
.
5.
Click
Save
.
Содержание W30AP
