300 Mbps In-Wall Access Point
User Guide
5
Status
5.1
System Status
The access the page, choose
Status
>
System Status
.
The page displays the system and LAN port status of the AP.
Parameter description
Parameter
Description
Device Name
It specifies the name of the AP.
A unique AP name helps quickly identify the AP. You can change the AP name on
the
Network
>
LAN Setup
page.
System Time
It specifies the current system time of the AP.
Up Time
It specifies the time that has elapsed since the AP was started last time.
Number of Wireless
Clients
It specifies the number of wireless clients currently connected to the AP.
Firmware Version
It specifies the firmware version number of the AP.
Hardware Version
It specifies the hardware version number of the AP.
MAC Address
It specifies the physical address of the LAN port of the AP. If you connect the AP to
other devices using Ethernet cables, the AP uses this MAC address to communicate
with those devices.
Содержание W30AP
