300 Mbps In-Wall Access Point
User Guide
7.2
Radio Status
7.2.1
Overview
The
Radio
module is used to set Radio parameters of the AP. The following briefly describes the SSID
isolation function.
SSID isolation
This function isolates the wireless clients connected to different wireless networks of the AP. For example,
if user 1 connects to the wireless network corresponding to SSID1, whereas user 2 connects to the
wireless network corresponding to SSID2, the two users cannot communicate with each other after SSID
isolation is implemented.
7.2.2
Changing the Radio Settings
1.
Choose
Wireless
>
Radio
.
2.
Change the parameters as required. Generally, you only need to change the
Enable Wireless
,
Channel
,
and
Channel Lockout
settings.
3.
Click
Save
.
Disable SSID Isolation
SSID1
SSID2
Devices connect to
SSID1 and SSID2
can communicate
with each other
Enable SSID Isolation
SSID1
SSID2
Devices connect to
SSID1
and
SSID2
cannot communicate
with each other
Содержание W30AP
