IP-COM F1226P, Руководство пользователя

Страница: 13 / 58

12
Reboot
Force device to restart. Configurations will be erased
after Reboot. So please do save them before you restart
the switch.
Firmware Upgrade Upgrade firmware.
Port
Management
Port
Configuration
Display and allow you to config basic port parameters,
such as link status, speed/duplex, MAC address
learning, flow control (enabled by default) and
broadcast storm control (enabled by default), etc.
Port Mirroring
Display and allow you to config port mirroring settings.
Aggregation enabled or STP enabled port cannot be
configured as a mirroring destination port.
Statistics
Display the number of packets transmitted and received
on corresponding ports. Statistics info will be cleared
automatically if statistic mode is changed.
Rate Limit Display and allow you to config port rate limit settings
Link
Aggregation
Provide 3 groups of aggregation and 4 algorithms to
increase bandwidth and implement load balancing.
PoE
Management
Global Settings
a).Configure power management mode (The default is
Dynamic Allocation);
b). View Current Power Utilization and PSE
Temperature.
Port Configuration
a). Configure PoE status, PoE standard, priority and
static power allocation;
b). View the amount of power supplied to connected
PDs and PD class.
Device
Management
VLAN
VLAN Mode
Toggle
Change VLAN mode.
Port VLAN Display port VLAN configurations.
802.1Q
VLAN
Display 802.1Q VLAN configurations.
Port
Properties
Display and allow configuring PVID and tagging
settings on the port.
MAC Configure MAC address binding feature
QoS Configure QoS settings
STP
Global
Settings
Configure STP global settings (enable/disable STP, STP
version, system priority, Hello Time, delay, Max age
time), loopback detection settings (enable/disable