38
configure the port 1’s PVID to any existing VLAN ID, for example, 4; however, if the existing VLAN ID 4 is
deleted, port 1’s PVID will be reset to the default value of 1.
3.5.2 MAC Binding
When a unicast MAC address is bound to a specific port on the switch, messages carrying this MAC as a source
MAC address can only be received and forwarded by this bound port and will be directly dropped by other
recipients; messages carrying this MAC as a destination MAC address will only be forwarded by switch to the
specific bound port. A bound MAC address will not age out.
This feature is especially helpful to prevent any unauthorized access to your network.
Click
Device Management
>
MAC Binding
to enter the screen below:
Fields on the screen are described below:
Field
Description
Select Port
Select a port number you wish to configure.
Static MAC
Address
Manually enter the MAC address (unicast address only) you wish to bind with the port
on switch. Each port can bind up to 3 addresses.
Binding
Enable/disable MAC binding feature. By default, this feature is disabled.
Status
Display current port’s binding status: enabled or disabled.
To enable port-MAC binding feature do as follows:
1)
Select the port number you wish to bind, say, 1
2)
Manually enter the MAC address (unicast address only) you wish to bind with the selected port, say,
00-B0-4C-00-00-01.
3)
Select Enable from the Binding drop-down list.
4)
Click OK to complete your configurations.
Note:
Ports that are enabled with MAC address binding will no longer be able to learn MAC addresses.
Содержание F1226P
Страница 1: ......
