DISCONNECT the computer power cord and
remove the cover.
(Refer to your computer manual
if removal is unclear.)
On some computers (especially tower models), you may need to remove the
computer’s face plate as well as the cover in order to access the drive bays.
WARNING
Always disconnect computer electrical power at power
source before beginning a computer hardware change.
M
Identify the IDE interface connection you want
to use for the Zip ATAPI drive.
•
If the computer has an IDE hard drive, there may be an available
connection on the primary IDE interface cable.
•
If there are two drives connected to the primary IDE cable, connect
the Zip ATAPI drive on the secondary IDE channel or use an IDE
interface card.
•
If there is not an existing IDE interface cable with an available
connection, you will need a standard 40-pin IDE interface cable for
connecting the Zip ATAPI drive.
3
4
2
