Check system requirements.
•
Pentium or higher IBM-compatible computer (recommended)
•
Empty 3
1
⁄
2
or 5
1
⁄
4
inch drive bay with front panel access
•
Embedded IDE interface or IDE card
•
Windows NT, Windows 95, Windows 3.1, or
DOS version 5.0 or higher
•
Iomega Tools software (included with the Zip ATAPI drive)
M
BIOS Support:
It is recommended that BIOS support for the
Zip ATAPI drive be disabled in the CMOS setup. On some systems
with autodetection, it will be necessary to specifically turn off
autodetection for the Zip ATAPI drive. Refer to the Owner’s
Manual for your computer if you need more information.
The Zip ATAPI drive meets the latest ATAPI specifications; however
some computers with early ATAPI support do not meet these
specifications and so may not work correctly with removable ATAPI
drives like the Zip ATAPI drive. Refer to the Zip ATAPI Errata sheet
for additional information.
M
Unpack the Zip ATAPI drive.
CAUTION
Before handling the Zip ATAPI drive, touch a grounded
metal object (like an unpainted metal screw on the back of your
computer) to discharge any buildup of personal static electricity.
M
Tools
100MB Zip Tools Disk
(contains Tools software)
Install Diskettes
and User’s Guide
3.5" Universal
Installation Kit
(
includes mounting screws)
1–
2–3–
4–
Attach the left r
ail 1 to the f
aceplate 3 inser
t bottom
tab first, then repeat process f
or the r
ight r
ail
Attach the DC cab
le 4 onto the connector of the disk dr
iv
e.
Slide the disk dr
iv
e into position, aligning the
bottom holes of the disk dr
iv
e with posts of the br
ac
ke
t
assemb
ly
.
Ve
rify that no gaps are present on the f
aceplate
.
Align the disk dr
iv
e retaining clip 5 o
ver the center of the disk
dr
iv
e as pictured.
Slightly fle
x the dr
iv
e clip and push do
wn until
both clip tabs engage the slots on the bottom of each r
ail.
NO
TE:
6 Scre
ws w
ere pro
vided in this kit to fur
ther secure
the br
ac
kets to the disk dr
iv
e if desired,
ho
w
ev
er
THIS IS NO
T A NECESSAR
Y STEP!
Zip ATAPI Drive
2
1
1
Installation Guide
