Pre-Installation Planning
3
Iomega DataSafe NAS
Familiarizing Yourself with Your DataSafe NAS
Front Panel
The DataSafe NAS front panel has four LEDs. Three are grouped together on the right side, one on the
left. The LEDs indicate the following:
• Far left LED (soft power switch). Solid LED indicates power on. This LED will blink during
boot-up, and will also blink to indicate error conditions (See DataSafe NAS User’s Manual for
alert codes).
• Network Link 1 for LAN 1. Flashing indicates network activity.
• Network Link 2 for LAN 2. Flashing indicates network activity.
• Hard disk drive LED indicates read/write activity.
Figure 1-1. LEDs
Back Panel
Each Ethernet Port has two LEDs. One indicates link and the other activity.
NOTE:
On units with a Gigabit Ethernet option installed, additional LEDs will be present.
Figure 1-2. NIC connections, Back Panel
SOFT POWER SWITCH
HARD DISK
LAN 1
DRIVE
LAN 2
CONNECTIONS
POWER
FOR Field Service Personnel ONLY
SCSI
PORT
Gigabit
Option
(BACK PANEL)
CONNECTION
FAN
CONNECTION
UPS
LAN 1
LAN 2
Содержание 1562
Страница 1: ......
