11
Not in potential explosive areas.
Not in the cool air directly.
Not near the television antenna or antenna cable.
Not higher than altitude of about 2000m above sea level.
Not in environment of precipitation or humidity (＞95%).
Under good ventilation condition.
The ambient temperature in the range of -20℃ to +60℃.
The slope of the wall should be within ± 5°.
The wall hanging the inverter should meet conditions below:
1) Solid brick/concrete, or strength equivalent mounting surface;
2) Inverter must be supported or strengthened if the wall’s strength isn’t enough
(such as wooden wall, the wall covered by thick layer of decoration)
Please AVOIDE direct sunlight, rain exposure, snow laying up during installation and
operation.
4.3.2 Space Requirement
4.3.3 Mounting
Tools required for installation.
Installation tools: crimping pliers for binding post and RJ 45, screwdriver, manual wrench
etc.
Position
Min. size
Left
300mm
Right
300mm
Top
300mm
Bottom
300mm
Front
300mm
300mm
300mm
300mm
300mm
Содержание BD-RH1 Series
Страница 1: ...BD RH1 Series Hybrid Inverters User Manual...
