18
1.2 Important safety instructions!
For your own safety, you should read this chapter completely first!
DANGER!
Electric shock due to improper mains connection
Only connect the device to a properly connected mains socket with a mains voltage of 230V ~ / 50 Hz using the
mains adapter supplied. Do not make any changes to the plug-in power supply, cable or socket and regularly
check the insulation of the cable for damage. Never immerse the device in water. Only wipe it with a slightly
damp cloth. Failure to observe this may result in an electric shock, fire and danger to life. If you are unsure,
contact an authorized electrician.
NOTE!
Disconnection from the mains
The mains plug is the main separating element. Unplug the power adapter to completely disconnect the device
from the power source. Make sure that the socket is close to the device and easily accessible. Never use this
device near damp places such as Wash basins, bathtubs or ponds and lakes.
WARNING!
Operating conditions
This product is designed for indoor use only.
Make sure that the power adapter or its cable is never wet or wet
gets wet. Do not place any objects filled with liquids, e.g. Cups or beer bottles, next to or on the device. Avoid
direct sunlight, heavy dirt and strong vibrations. Always handle the power adapter directly. Do not pull on the
cord and never touch the AC adapter with wet hands as this may cause a short circuit or electric shock
Scope of delivery:
1x "SCANControl", 1x power supply, 1x user manual.
Please check whether all parts included in the scope of delivery are actually in the packaging!
NOTE:
The power supply is in the side padding in a small, white box!
1.3 Intended use:
This information sheet contains important information on the safe operation of the device. Make sure that
this information is available to everyone who uses this device.
The type plate and serial number are on the back of the device.
The INVOLIGHT “SCANControl” DMX512 controller is a light control device that can be used to control DMX-
controllable lighting effects, in particular scanners, moving lights, but also spotlights and lighting effects as well as
lasers etc. This device is not intended for home use and may only be operated by people who have the
appropriate knowledge and experience. Do not let children play or handle it.
The device is only approved for DC voltage via a DC9 / 12V, 1000 mA power supply and only for indoor use.
Light control devices such as the "SCANControl" are sensitive and technically sophisticated devices that must be
handled with care. Therefore, avoid vibrations and the effects of violence during assembly / dismantling and when
using the device.
Only use the "SCANControl" in professional use if you are familiar with the functions and are familiar with the
operation. The permitted operating temperature must be in the range -5 ° to + 45 ° Celsius and the relative air
humidity must not exceed 50% (at + 45 °)! Direct sunlight must be avoided during use and also during transport.
For your own safety and that of other people, make sure that there are no cables lying around.
In the event of a thunderstorm, the device must be disconnected from the mains!
