1EnIDL5000HD-print.fh10 1/18/06 12:53 PM Page 11
Composite
C
M
Y
CM
MY
CY CMY
K
5. Operating Instructions:
Knowing your basic controls
To become acquainted with the operations and functions of your receiver, you must know how to use the
control buttons on the Front Panel and the Remote Control.
The following segment is an introduction to features that you will most commonly notice or use.
5.1 Switching On Your Digital Receiver
Before you switch on your receiver please ensure the power lead is plugged into a 240V AC socket.
Remember that as long as the digital receiver remains plugged into a 240V supply, the receiver will be in
constant “STANDBY”.
Switch on your receiver by pressing either the “Power” button on the remote control or the button on the
front panel. While the digital receiver is in normal viewing mode, the green LED lights up.
When not using the digital receiver, put your equipment in the “STANDBY” mode by pressing either one
of the “Power” buttons again. When the red “STANDBY” LED lights up, it indicates the digital receiver is
in “STANDBY” mode. The front panel will show current local time.
