1EnIDL5000HD-print.fh10 1/18/06 12:53 PM Page 10
Composite
C
M
Y
CM
MY
CY CMY
K
4.5 Audio Display setting
During the format set up, if you select Plasma / LCD as the
display type, your digital receiver will ask you to set up Lip
Sync Compensation. Generally speaking, Plasma Display
Panels introduce a slight time delay in the picture, which may
cause a problem with lip sync. Use “Up/Down” on the remote
control to select the delay and confirm by pressing OK. Typically
this delay is in the order of 20 – 40 ms. Select Aspect Ratio
The first time the digital receiver is installed, or after Factory
Reset. You will be asked to select Center Cut or Letter Box
(See chapter 6.2.2 for definition).
4.6 Time / Date Settings
Time/Date settings:
If the ”Automatic Time Update” is set to
“On”, the receiver will receive the digital clock time and date
as broadcasted by the digital TV program providers, and will
apply these. The DVB standard will broadcast this in GMT
time zone. In order to display local time correctly, It may be
necessary to set a time offset, indicating the difference between
local time and GMT (e.g. in Germany daylight savings time
in summer is +2h, winter time is +1h)
Clock mode:
The time can be displayed in 12 or
24-hour format.
Automatic Time Update:
The receiver can either receive the
current time via the digital TV programmers (On). or it can
calculate current time independently (Off).
4.7 Preprogrammed List
The final step of the installation procedure is to select the
country you are in. Based on your selection, a default program
list will be used in the database. You can change the country
at any time. Please refer to Section 6.6.4.3.
