Inverness Medical Inratio2, Руководство пользователя

Страница: 29 / 36

EN
29
Display Screen What it Means Action to Take
Test result is above the high
target you set in the monitor.
Test result is below the low
target you set in the monitor.
Repeat tet. If result is still
above the high target, follow
your standard procedure
for treating patients with a
high INR.
Repeat test. If result is still
below the low target, follow
your standard procedure
for treating patients with a
low INR.
(Example shown is in INR
display mode)
(Example shown is in INR
display mode)
15. Hazards and Symbols
The monitor generates radio frequency (RF) energy. If your monitor is not set up and
used according to this User Guide, the RF energy may interfere with other devices in the
area. Call Technical Support if you have any questions on RF interference.
Any devices connected to the data port must be certified according to the respective IEC
standards (i.e. IEC 60950 for data processing equipment and IEC 60601-1 for medical
equipment). Furthermore all configurations shall comply with the system standard IEC
60601-1-1. Anybody who connects additional equipment to the data port that
configures a medical system is responsible that the system complies with the
requirements of IEC 60601-1-1. Please contact Technical Support if you
have any questions about connecting devices to the data port.
Use only the INRatio Power Supply (Part #0100011 or 0100260) or you may
damage the monitor.
IEC 60601-1:1988 + A1:1991 + A2:1995