Inverness Medical Inratio2, Руководство пользователя

Страница: 13 / 36

EN
13
Press the button when you have the correct display mode on the display.
11. Select the target range mode
An INR target range may be set in your monitor to alert you when test results fall outside the
range.
CAUTION: If results fall outside the target range, or if results fall within
the target range but are not consistent with the patient’s current health
status (e.g., they have symptoms such as bleeding or bruising), follow your
usual procedures for taking corrective action.
Use the the and buttons to switch between the Target ON and
OFF modes.
If you want the target range mode ON, press the button
when the Target Range ON symbol ( ) is on the display.
Go to
step 12.
( = Target range mode ON)
If you want the target range mode OFF, press the button
when the Target Range OFF symbol ( ) is on the display. You
will return to the monitor display that prompts you to insert a test
strip. Skip steps 12 and 13.
( = Target Range mode OFF)
INR + QC Mode
Test results are displayed in
International Normalized Ratio
(INR) units, along with the
Quality Control (QC) results
that are taken every time you
perform a test.
INR + PT + QC Mode
Test results are displayed in
International Normalized Ratio
(INR) units, Prothrombin Time
(PT) seconds and the Quality
Control (QC) results that are
taken every time you perform
a test.
INR + QC Mode
(Example INR + QC Mode)
INR + PT +QC Mode
(Example INR + PT + QC Mode)