Inverness Medical Inratio2, Руководство пользователя

Страница: 16 / 36

EN
16
2. Insert a test strip into the test strip guide on the
monitor
Remove a fresh test strip from its foil pouch. Insert it into the
test strip guide so that the clear end with the vertical contact
bars goes in first. On the blue end of the strip you should be able
to read the word “INRatio®” appearing from left to right. Make
sure the sample well in the strip lines up with the green light on
the test strip guide.
3. Match the code on the monitor display with the
strip code on the test strip pouch or strip container
If the codes match, simply press the button while “OK? “is
flashing on the display and proceed to Step 4.
8. Performing a Test
Follow these steps to perform a test.
CAUTION: Always place the monitor on a flat surface that is free of
vibration while you perform a test. DO NOT hold the monitor in your hand.
Failure to do so may cause inaccurate results.
1. Press and hold the button or insert a fresh test strip to turn the
monitor ON
The monitor will
automatically perform a self
test where all segments on
the display will appear.
The monitor will prepare for
a test for a few seconds.
If you turned the monitor on
by pressing the button,
the monitor will prompt you
to insert a test strip (go to
step 2).
If you turned the monitor on
by inserting a fresh test strip,
the monitor will prompt you
to confirm the strip’s code
(go to step 3).