Communication with the module is done via LAN and RS485 (Modbus RTU)
The following communication options are available:
–
embedded web server, using a standard internet browser (preferred browsers are
MOZILLA FIREFOX, OPERA, CHROME),
–
windows / linux command line programs
–
HTTP protocol
–
Modbus TCP protocol
–
Modbus RTU protocol
–
SNMP protocol
–
own application via TCP protocol (shared protocol)
–
MQTT to Inveo server protocol
The module is equipped with an LED display on which the currently measured value is
displayed.
5.3
Description of the module connectors
The module is equipped with the following connectors:
•
LAN
– connection of LAN and power PoE IEEE 802.3af,
•
RESET
– a button to enabling the DHCP, checking the current IP address and
restoring the module to the factory settings,
•
mA / V –
screw connection for sensor connection (voltage/current),
•
RS485
– MODBUS RTU communication connection,
•
POWER –
power connection. An additional power connection used in the event of
a PoE power failure. Power supply voltage 12-24VDC.
User manual Nano Analog PoE v2
Page
9
of
32
[B01]
