8 The device functions
8.1
The device status
Current data from the sensor is displayed in the
Home
tab.
The field
Sensor Name
is the name of the sensor edited in the
Input
tab.
Alarm State
informs about exceeding set thresholds.
8.2
Configuration of the analog input
The
Input
tab is to configure the input type and signal conversion method.
Before configuring, it is recommended to read the chapter Sensor signal conversion flow.
Input Name
is the name of the sensor (not the device) given by the user.
The input type is set in the field
Type
. The options are:
•
4-20mA
•
0-20mA
•
0-5V
•
0-10V
User manual Nano Analog PoE v2
Page
17
of
32
[B01]
