2 Application of the device
The Nano Analog PoE device is used to transmit the measured current or voltage across
the LAN. The measured value is available through the embedded website and via HTTP
GET, Modbus TCP, SNMP and MQTT protocols. An additional RS485 port enables
communication via the Modbus RTU protocol. The device can send an exceeded value to
other Inveo modules, causing eg remote activation of the relay.
3 Warranty and liability of the manufacturer
The manufacturer provides a 2-year warranty on the device. The manufacturer also
provides post-warranty service for 10 years from the date of the introducing the device
on the market. The warranty covers all defects in material and workmanship.
The manufacturer undertakes to comply with the contract of guarantee, if the following
conditions are met:
all repairs, alterations, extensions and device calibrations are performed by the
manufacturer or authorized service,
supply network installation meets applicable standards in this regard,
the device is operated in accordance with the recommendations outlined in this
manual,
the device is used as intended.
The manufacturer assumes no responsibility for consequences resulting from improper
installation, improper use of the device, not following this manual and the repairs of the
device by individuals without permission.
This device doesn’t contain serviceable parts.
User manual Nano Analog PoE v2
Page
5
of
32
[B01]
