15
1: Basic
This program is mostly used for baking a
Basis
white bread.
2: French
The bakingtime with this program is
Frans
longer than with the normal program
which gives the bread a harder crust.
3: Whole wheat
This program is used for preparing bread
Volkoren
made from heavier flours, such as whole
wheat-, wheat- and multi-grainbread.
These flours need more time kneading
and rising. The bread will generally be
smaller because the flour is heavier.
4: Quick
You can use this program for baking a
Vlug
white bread in short amount of time.
The bread will be smaller then a bread
baked with the normal program.
5: Sweet
For preparing “sweet“ breads like bread
Zoet
with raisins and nuts.
6
: Gluten free
You can use this program for baking
Glutenvrij
a gluten free bread. The machine with
knead it, let it rise and will bake it.
7: Ultra-Fast
You can use this program for baking a
Extra snel
white bread of 650 grams within 90
min. and within 100 min. a bread of 800
grams.
8: Dough
With this program you can make dough
Deeg
for buns, pizza or any other recipe with
needs dough. The dough will not be
baked. A signal sounds, indicating that
the dough is ready and can be removed
from the breadpan.
9: Jam
For preparing a delicious jam. Note:
Make sure that you remove all the pips
before you put the ingredients in the
breadpan. Sharp pips can damage the
non-stickcoating. Process: Put all the
ingredients in a breadpan and select
the JAM program. Press Start and the
breadmaker will first heat up the
ingredients. After that the breadmaker
will mix and eventually the breadmaker
will cool down the jam. After the
breadmaker has finished you will hear a
beep-signal. You can put the jam in a
jar or container and leave it to cool. As
soon as it has cooled down sufficiently
you can close the jar or container and
keep it in the refrigerator.
10: Cake
For preparing a bread made with
bakingpowder instead of yeast. Breads
made with this program will be less high
and more compact. The timer cannot be
used with this program because of the
immediate activity of the bakingpowder.
If you want to make cake with this
program we advise you to put all the
ingredients in the breadpan. Select the
program and before you press start, stir
the ingredients with a wooden spoon.
This increases the kneading.
11
: Sandwich
You can use this program to make a soft
and airy bread for sandwiches.
Attention!
You can not set the color-crust when
using this program.
When, after switching on the breadmaker, the display says
“H:HH”, it means that the temperature of the breadmaker
is still too high. Open the lid and leave the breadmaker
to cool down before you bake another bread. When the
display says EE0 or EE1, unplug the breadmaker and
contact the service department.
MENU-button
Press this button to select one of the automatic
programs available. These settings are listed on the last
page of this manual. Every time you press this button
you will hear a beep and the number of the program
changes. The program is shown on the display. This
breadmaker has 12 programs (see: Programs).
START- and STOP-button
With this button you can either start or stop the program.
TIP:
If you have chosen the wrong program, you can
alter this by pressing the stop-button for a few seconds.
You can reset the breadmaker with the correct program.
START:
to start a program, press the button and you will
hear a beep. The colon in the time on the display will
blink and the time starts to countdown.
STOP:
to stop a program, press the button for a few
seconds until you hear a beep. The sound confirms that
you have stopped the program.
COLOR-button (KLEUR)
Press the color-button to select one of the three crust
colour settings available for the bread settings only; light,
medium or dark.
TIP:
If you try a recipe for the first time, we advise you
use crust colour medium.
GRAM-button
You use this button to select the size of bread you wish
to make. You can choose a bread of 650 or 800 grams.
TIP: The total amount of ingredients listed in the recipe,
is the size/ weight of the bread you are going to make.
TIMER (+/ -)
For use when setting the timer to delay baking. By
pressing the buttons «+» and «-», the time will move
up or down in 10 minutes increments to preset the
programmable timer. See: How to use the preset timer.
ON/OFF?
How to check if the
machine is working or if
the program is running?
If the colon blinks, the
program is running.
If the colon is steady, the
program has stopped.
5 | THE DISPLAY
7 | PROGRAMS
6 | ERRORS IN THE DISPLAY
their shape. Be careful not to use ingredients which are
too big and too hard. They can cause damage to the
non-stickcoating.
