INVENTOR P8MVI32-09WiFi, Руководство по обслуживанию

Страница: 32 / 72

30
7.7
How to Remove the Chassis
assembly
CAUTION: Because the 24K indoor unit is
relatively large and heavy, it must have two
persons to implement the following steps.
Step1:
Remove the left and right pipe cover.
Step2:
Remove the 5 screws A,B,C,D,E remove
support part F and G.
Step3:
Open the E-box, to lose the fan motor and
louver motor connectors from the PCB.
Step4:
Press the locker H and I, to lose the
indoor from the installation plate, lift it a
little and pull out it along the direction
indicated in right image.
Note:
It is not necessary to remove the panel to
remove the Chassis assembly, in order to
show clearly inside, these pictures are
without panel