inventiv 202116, Инструкция по безопасности и эксплуатации

Страница: 19 / 32

SAFETY AND OPERATING MANUAL
19
202116 2000W Heat Gun
MAINTENANCE
TROUBLE SHOOTING
ENVIRONMENTAL PROTECTION
Remove the plug from the socket before carrying out any adjustment, servicing or
maintenance.
There are no user serviceable parts in your power tool. Never use water or chemical cleaners to
clean your power tool. Wipe clean with a dry cloth. Always store your power tool in a dry place.
Keep the motor ventilation slots clean. Keep all working controls free of dust. Occasionally you
may see sparks through the ventilation slots. This is normal and will not damage your power
tool.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard.
1. If your heat gun will not operate, check the power at the mains plug.
2. If the outlet of the heat gun very hot, please rest until cold.
3. If a fault can not be rectified return the tool to an authorized dealer for repair.
Li-Io
Waste electrical products must not be disposed of with household waste. Please recycle
where facilities exist. Check with your local authorities or retailer for recycling advice.