40
The number of rules can be set by the value of
Number of data sending rules
parameter as well.
6.1.6.2.1. Number of data transmission rules
Function
- Number of rules used for data sending
Data type
- Number
Variation
range
- 1…32
Default value
- 1
Comment
- Decreasing this number does not delete the rule settings
until the configuration is saved into module
6.1.6.2.2. Rule for data sending
Each rule on the list is defined by the following parameters:
Trigger source
Trigger flag
IP address
6.1.6.2.2.1. Trigger source
Function
- Selects the source of event which can trigger the rule
Data type
- Selection
list
Variation
range
-
None
Rule disabled
I1, I2
Binary inputs
AN1, AN2
Analog inputs
T1, T2
Clock ticks
Bat_Low
Battery voltage low flag
Pow_On
Module power on flag
Default value
-
None
Comment
- None