manualshive.com logo in svg

inVENTer ZR10-D, Инструкция по установке и эксплуатации

Поделиться
Скачать
inVENTer ZR10-D Скачать руководство пользователя страница 34

34

ZR10-D controller 

•

 Installation and operating instructions

beWare

Incorrect positioning of the support ring.

Insertion of the blanking cover is not possible!

►  Arrange locking hooks at the top and bottom.

 

►  Locking hooks face out of the surface mounted box.

 

►

Attach support ring (18) with preassembled 

 

ixing screws (17) on the right cavity.

 

►

Ensure that the locking hooks (19) face out of  

 

the cabinet box.

 

►

Ensure that the locking hooks (19) are arranged  

 

at the top and at the bottom.

 

►

Align the support ring (18) horizontally.

 

► Secure the support ring (18) with ixing screws (17) 

 

 

on the cabinet box (20).

9

1

7

1

8

1

0

2

Ö

The transformer is now installed.

Installing the controller

Requirements:
Fan cable in place.
Transformer is installed.
Transformer cable connector and fan cable connector are installed.

 

►

Insert the 2-pin transformer connector (2) into 

 

2-pin transformer socket (1).

 

►

Ensure that the 2-pin transformer socket (1) is 

 

at the top.

 

►

Insert the 3-pin fan connector (3) into 3-pin 

 

fan socket (4).

 

►

Turn the controller board (5) so that the cables 

 

 point backwards.

Ö

Cables point backwards.

2

3

4

5

1

 

►

Attach the controller board (6) with preassembled 

 

ixing screws (8) on the cabinet box

 

►

Align the controller board (6) horizontally.

 

►

Secure the controller board (6) with 

 

ixing screws (8) to the cabinet box (7).

6

7

8

assembly anD InsTallaTIon

Содержание ZR10-D

















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды