inVENTer Pulsar Скачать руководство пользователя страница 31

Страница: 31 / 36

Pulsar extractor fan

•

Installation and operating instructions

Requirements:
The power supply is disconnected.
230 V AC: Disconnect the switch on the Pulsar extractor fan. The switch is located on the left side of the fan casing.

Push it down into position 0.

12 V DC: Disconnect the power supply at the mains fuse or the external switch.



The Pulsar extractor fan has been cleaned.

►

Clean the wall sleeve, fan casing and fan unit with a damp
cloth.

Make sure

that the fan is cleaned directly in the fan unit;

it must not be removed.

►

Carefully insert the fan unit, with the feet first, into the two
guides (red arrows) on the fan casing.

Ensure that

the fan unit is not tilted during installation.

This ensures that the feet and the fan are not damaged.



A clearly audible click confirms that the fan unit is
installed correctly.

►

Grip the fan unit from behind with both hands.

►

Pull the fan unit out of the fan casing from the front.

►

Remove the fan unit from the fan casing.

Ensure that

you hold the fan unit firmly so that it does not

fall to the ground when released.

CLEANING AND MAINTENANCE

Содержание Pulsar





































Результаты поиска

Содержание Pulsar

Отзывы:

Похожие инструкции для Pulsar

Бренды по названию

Популярные бренды

inVENTer Pulsar, Инструкция по установке и эксплуатации

Результаты поиска

Содержание Pulsar

Отзывы:

Похожие инструкции для Pulsar

Бренды по названию

Популярные бренды