5
Pulsar extractor fan
•
Installation and operating instructions
Intended use
The Pulsar extractor fan is designed to ventilate rooms
with external windows, taking into account the specifica-
tions and applications described in these instructions, and
only in conjunction with components that are recommend-
ed by inVENTer GmbH and mentioned in this documenta-
tion. Changes or modifications to the equipment/system
are not permitted.
Trouble-free and safe operation of the equipment depends
on proper transportation, proper storage and installation
as well as careful operation and maintenance. Observe
all safety instructions that are contained in this documen-
tation.Any kind of use other than the intended use will
exclude all liability claims.
Improper use
Do not install the equipment in areas which...
• contain (or may contain) strong oils or lubricants.
• contain (or may contain) flammable gases, liquids or
vapours.
• are exposed to ambient temperatures below 5 °C and
above 50 °C
• contain (or may contain) obstacles preventing access to
the fan or its removal.
Qualified personnel
The equipment may only be set up and operated in con-
junction with this documentation. Installation and operation
may only be carried out in conjunction with this docu-
mentation. Installation and electrical connection of the
equipment may only be performed by qualified personnel.
Qualified personnel within the meaning of the safety notices
in this documentation are persons who are authorised to
install, put it into operation and identify equipment, systems
and circuits in accordance with established safety proce-
dures.
General safety regulations
• Always observe the relevant standards, regulations and
guidelines when working.
• The Pulsar extractor fan is designed for fixed installation
with permanent cabling.
• DANGER:
Observe the installation instructions in accor-
dance with VDE 0100 when establishing connections in
damp areas. The Pulsar extractor fan may only be installed
outside protection area 0 (
3.1, page 8).The Pulsar
extractor fan must not be used in areas in which direct
contact with water spray is possible over a prolonged
period.
• DANGER:
When laying the power supply cable, observe
the requirements of protection class II.
• DANGER:
Ensure that the power supply (voltage,
frequency and phase) correspond to the specifications on
the type plate.
• CAUTION:
Operation and/or maintenance of the device
must not be carried out by children and/or persons who
are not fully capable of doing so due to their physical,
sensory or mental capabilities, inexperience or lack of
knowledge. Young children should be supervised to ensure
that they do not play with the device.
• Ensure sufficient air supply in the room, for example, via a
large gap under the door.
• CAUTION:
Install a pressure monitor in rooms with open
flues. Consult your chimney sweeper and/or building
planner!
• The extractor fan may only be commissioned after
completion of the construction project.
USER AND SAFETY INSTRUCTIONS
