20
Pulsar extractor fan
•
Installation and operating instructions
5.3 Inserting and connecting the Pulsar extractor fan
Screw driver, drilling machine, rawl plugs, screws, spirit level, wire stripping tool
Requirements:
The wall sleeve is mounted and any protective discs have been removed.
The power/operating voltage cable (230 V, 50 Hz / DC 12 V) is laid.
►
Grip the fan unit from behind with both hands.
►
Pull the fan unit out of the fan casing from the front.
Ensure that
you hold the fan unit firmly so that it does not
fall to the ground when released.
►
Carefully remove the rubber seal from the back of the fan
casing.
Ensure that
you pull off the rubber seal, beginning on the
opposite side of the integrated switch.
►
Remove the rubber seal completely from the fan casing.
Take care
not to damage the integrated switch (red
arrow).
INSTALLATION