Invacare Tracer EXI Скачать руководство пользователя

Страница: 5 / 44

Part No. 1110547

Tracer® EXI

SPECIAL NOTES

WARNING/CAUTION notices as used in this manual apply to hazards or

unsafe practices which could result in personal injury or property damage.

NOTICE

THE INFORMATION CONTAINED IN THIS DOCUMENT IS SUBJECT

TO CHANGE WITHOUT NOTICE.

WHEELCHAIR USER

As a manufacturer of wheelchairs, Invacare endeavors to supply a wide

variety of wheelchairs to meet many needs of the end user. However, final

selection of the type of wheelchair to be used by an individual rests solely

with the user and his/her healthcare professional capable of making such a

selection.
WHEELCHAIR TIE-DOWN RESTRAINTS AND SEAT RESTRAINTS

Invacare recommends that wheelchair users NOT be transported in

vehicles of any kind while in wheelchairs. As of this date, the Department of

Transportation has not approved any tie-down systems for transportation

of a user while in a wheelchair, in a moving vehicle of any type.
It is Invacares position that users of wheelchairs should be transferred into

appropriate seating in vehicles for transportation and use be made of the

restraints made available by the auto industry. Invacare cannot and does

not recommend any wheelchair transportation systems.
AS REGARDS RESTRAINTS - SEAT POSITIONING STRAPS - IT IS THE

OBLIGATION OF THE DME DEALER, THERAPISTS AND OTHER

HEALTHCARE PROFESSIONALS TO DETERMINE IF A SEATING

RESTRAINT IS REQUIRED TO ENSURE THE SAFE OPERATION OF

THIS EQUIPMENT BY THE USER. SERIOUS INJURY CAN OCCUR IN

THE EVENT OF A FALL FROM A WHEELCHAIR.

SPECIAL

NOTES

SPECIAL NOTES

All manuals and user guides at all-guides.com

Содержание Tracer EXI













































Результаты поиска

Содержание Tracer EXI

Отзывы:

Похожие инструкции для Tracer EXI

Бренды по названию

Популярные бренды

Invacare Tracer EXI, Руководство владельца по эксплуатации и техническому обслуживанию

Результаты поиска

Содержание Tracer EXI

Отзывы:

Похожие инструкции для Tracer EXI

Бренды по названию

Популярные бренды