Invacare Tracer EXI Скачать руководство пользователя

Страница: 12 / 44

Tracer® EXI

Part No. 1110547

WARNING

DO NOT attempt to lift the wheelchair by any removable (detachable)

parts. Lifting by means of any removable (detachable) parts of a wheelchair

may result in injury to the user and/or assistant or damage to the wheelchair.
Always verify that hand grips on the rear cane are secure PRIOR to use when an

assistant is used to propel or lift the chair. Check for any signs of looseness or

deterioration and if found, contact a qualified technician. DO NOT attempt to

move the wheelchair by pulling on the hand grips if they are found to be unsecure

or have deteriorated.

Also, be aware of detachable parts such as armrests or legrests. These must NEVER be used

to move the wheelchair or as lifting supports, as they may be inadvertently released, result-

ing in possible injury to the user and/or assistant(s).
When learning a new assistance technique, have an experienced assistant help you before

attempting it alone.

PERCENTAGE OF WEIGHT DISTRIBUTION

WARNING

DO NOT attempt to reach objects if you have to move forward in the seat

or pick them up from the floor by reaching down between your knees.
The size/position of the front casters, size/position of the rear wheels, use

of anti-tipper model, as well as the user condition directly relate to the

stability of the wheelchair. Any change to one (1) or any combination of

the six (6) may cause the wheelchair to decrease in stability. These

adjustments MUST be performed by a qualified technician.

Many activities require the wheelchair

owner to reach, bend and transfer in and

out of the wheelchair. These movements will

cause a change to the normal balance, the

center of gravity, and the weight distribution

of the wheelchair. To determine and estab-

lish your particular safety limits, practice

bending, reaching and transferring activities

in several combinations in the presence of a

qualified healthcare professional BEFORE

attempting active use of the wheelchair.
Proper positioning is essential for your

safety. When reaching, leaning, or bending forward, it is important to use the front casters as

a tool to maintain stability and balance.

CENTER OF

GRAVITY

UNOCCUPIED

OCCUPIED

SECTION 1

GENERAL GUIDELINES

GENERAL

GUIDELINES

All manuals and user guides at all-guides.com

Содержание Tracer EXI













































Результаты поиска

Содержание Tracer EXI

Отзывы:

Похожие инструкции для Tracer EXI

Бренды по названию

Популярные бренды

Invacare Tracer EXI, Руководство владельца по эксплуатации и техническому обслуживанию

Результаты поиска

Содержание Tracer EXI

Отзывы:

Похожие инструкции для Tracer EXI

Бренды по названию

Популярные бренды