Invacare Tracer EXI Скачать руководство пользователя

Страница: 10 / 44

Tracer® EXI

Part No. 1110547

TIRE PRESSURE

WARNING

DO NOT use your wheelchair unless it has the proper tire pressure

(p.s.i.). DO NOT overinflate the tires. Failure to follow these instructions

may cause the tire to explode and cause bodily harm. The recommended

tire pressure is listed on the side wall of the tire.
Replacement of a pneumatic tire or tube MUST be performed by a

qualified technician.

WEIGHT TRAINING

WARNING

Invacare DOES NOT recommend the use of its wheelchairs as a weight

training apparatus. Invacare wheelchairs have NOT been designed or

tested as a seat for any kind of weight training. If occupant uses said

wheelchair as a weight training apparatus, Invacare shall NOT be liable

for bodily injury and the warranty is void.

WEIGHT LIMITATION

WARNING

The Tracer EXI wheelchair has a weight limitation of 250 lbs. (114 kg.).

SECTION 1

GENERAL GUIDELINES

GENERAL

GUIDELINES

WARNING (CONTINUED)

Before attempting to transfer in or out of the wheelchair, every

precaution should be taken to reduce the gap distance. Turn both casters

parallel to the object you are transferring onto. When transferring to and

from the wheelchair, ALWAYS ENGAGE BOTH WHEEL LOCKS.
DO NOT use parts, accessories, or adapters other than those authorized

by Invacare.
DO NOT attempt to lift the wheelchair by any removable (detachable)

parts. Lifting by means of any removable (detachable) parts of a

wheelchair may result in injury to the user and/or assistant or damage to

the wheelchair.
DO NOT stand on the frame of the wheelchair.
DO NOT use the footplate as a platform. When getting in or out of the

wheelchair, make sure that the footplates are in the upward position.
ALWAYS use the handrims for self-propulsion. Inasmuch as the

HANDRIMS are an option on this wheelchair (you may order with or

without the handrims), Invacare strongly recommends ordering the

handrims as an additional safeguard for the wheelchair user.

All manuals and user guides at all-guides.com

Содержание Tracer EXI













































Результаты поиска

Содержание Tracer EXI

Отзывы:

Похожие инструкции для Tracer EXI

Бренды по названию

Популярные бренды

Invacare Tracer EXI, Руководство владельца по эксплуатации и техническому обслуживанию

Результаты поиска

Содержание Tracer EXI

Отзывы:

Похожие инструкции для Tracer EXI

Бренды по названию

Популярные бренды