Invacare Tracer EXI Скачать руководство пользователя

Страница: 31 / 44

Part No. 1110547

Tracer® EXI

REAR WHEELS

SECTION 6

Section 6 - Rear Wheels includes the following:
Removing/Installing the Rear Wheels
Replacing Rear Wheel Handrim
Replacing/Repairing Rear Wheel Tire/Tube

WARNING

After ANY adjustments, repair or service and BEFORE use, make sure all

attaching hardware is tightened securely - otherwise injury or damage may

occur.

REMOVING/INSTALLING THE REAR WHEELS

WARNING

If changing the size of the rear wheel or a change in the SEAT-TO-

FLOOR HEIGHT

is desired, this procedure MUST be performed by a

qualified technician.
Make sure both rear wheels are the same size and are installed into the

same respective mounting hole BEFORE using the wheelchair, otherwise

injury may occur.

PERMANENT AXLES (FIGURE 1)

NOTE: If replacing the same size rear wheel, note the mounting position on the wheelchair frame

for proper reinstallation of the NEW rear wheel.

1. Remove the dust cap (SA Frame ONLY), hex screw, washer (SA Frame ONLY),

spacer (if installed) and locknut that secure the rear wheel to the wheelchair frame.

NOTE: The spacer is used on wheelchairs with removable arms ONLY.

2. Repeat STEP 1 for the opposite rear wheel.
3. To reinstall the rear wheel(s) onto the wheelchair, reverse STEPS 1-2. Torque

locknut to 40 FT-LBS.

4. Adjust wheel locks. Refer to WHEEL LOCK ADJUSTMENT

in SECTION 8

of this

manual.

REAR WHEELS

FIGURE 1 - REMOVING/INSTALLING THE REAR WHEELS -

PERMANENT AXLES

Locknut

Dust Cap

(SA Frame ONLY)

Axle Mounting Hole

Rear Wheel

Hex Screw

Spacer (Wheelchairs with

Removable Arms ONLY)

Wheelchair

Frame

Washer

(SA Frame ONLY)

All manuals and user guides at all-guides.com

all-guides.com

Содержание Tracer EXI













































Результаты поиска

Содержание Tracer EXI

Отзывы:

Похожие инструкции для Tracer EXI

Бренды по названию

Популярные бренды

Invacare Tracer EXI, Руководство владельца по эксплуатации и техническому обслуживанию

Результаты поиска

Содержание Tracer EXI

Отзывы:

Похожие инструкции для Tracer EXI

Бренды по названию

Популярные бренды