SECTION 10—ANTI-TIPPER
Part No 1134343
63
Crossfire
™
T6A Wheelchair
Replacing Anti-tipper
WARNING
When anti-tippers are used, anti-tippers MUST be adjusted to maintain a 1-1/2 to
2-inch clearance between the bottom of the anti-tipper wheels and the
ground/floor. This spacing should ALWAYS be checked whenever adjust-
ments/changes are made to the wheelchair. Failure to maintain proper spacing may
result in the chair tipping over backward causing serious injury or property damage.
1. Press
in
the
release
button
that
secures
the
existing
anti
‐
tipper
to
the
anti
‐
tipper
bracket
and
remove
the
anti
‐
tipper
from
the
anti
‐
tipper
bracket.
2. Insert
the
new
anti
‐
tipper
into
the
anti
‐
tipper
bracket
until
lock
buttons
protrude
out
of
mounting
hole.
3. Press
in
the
lock
button
on
the
anti
‐
tipper
bar
and
install
the
anti
‐
tipper
wheels
onto
the
new
anti
‐
tipper
bar.
4. Repeat
STEPS
1
‐
3
for
the
opposite
anti
‐
tipper.
5. Measure
the
distance
between
the
bottom
of
the
anti
‐
tipper
wheels
and
the
ground
floor.
6. If
necessary,
adjust
the
height
of
the
anti
‐
tippers.
Refer
to
Adjusting
Anti
‐
tipper
on
page 62.
