Invacare Storm 4 Max Скачать руководство пользователя

Страница: 62 / 78

Invacare® Storm®⁴ Max

9.2.2 Weekly

Item

Inspection check

If inspection is not passed

Armrests /side parts

Check that armrests are firmly attached
in their holders and do not wobble.

Tighten the screw or clamping lever that holds the
armrest (see chapter

5 Setup, page 26

Contact your provider.

Tires (pneumatic)

Check that the tires are undamaged.

Contact your provider.

Check that the tires are inflated to the
correct pressure.

Inflate the tire to the correct pressure (see chapter

11 Technical Data, page 68

Contact your provider to have it repaired.

Tires (puncture-proof)

Check that the tires are undamaged.

Contact your provider.

9.2.3 Monthly

Item

Inspection Check

If Inspection is not Passed

All upholstered parts

Check for damage and wear.

Contact your provider.

Removable legrests

Check whether legrests can be fixed securely and whether
loosening mechanism is properly operable.

Contact your provider.

Check that all adjustment options function properly.

Contact your provider.

Castors

Check that castors rotate and swivel freely.

Contact your provider.

Drive wheels

Check that drive wheels rotate without wobbling. It is easiest
to have someone stand behind mobility device and observe
drive wheels as you drive away from them to do this.

Contact your provider.

Electronics and connectors

Check all cables for damage and all connecting plugs for snug
fit.

Contact your provider.

1547067-H

Содержание Storm 4 Max















































































Результаты поиска

Содержание Storm 4 Max

Отзывы:

Похожие инструкции для Storm 4 Max

Бренды по названию

Популярные бренды

Invacare Storm 4 Max, Руководство пользователя

Результаты поиска

Содержание Storm 4 Max

Отзывы:

Похожие инструкции для Storm 4 Max

Бренды по названию

Популярные бренды