Invacare® Storm®⁴ Max
1.
Loosen the screws (1).
2.
Adjust the armrest to the desired width.
3.
Retighten the screw.
4.
Repeat this procedure for the second armrest.
5.4 Adjusting the seat angle
CAUTION!
Adjusting the seat tilt or the backrest angle
changes the geometry of the mobility device
and directly influences its dynamic stability!
– For details regarding dynamic stability,
negotiating gradients and obstacles and the
correct adjustment of seat tilt or backrest angle,
refer to
and
Driving up and down Gradients, page 45
5.4.1 Manually using spindle
The seat angle is adjusted by means of a spindle, which is
to be found at the front underneath the seat frame.
When adjusting the seat angle it should be ensured that at
least 1 cm of the threaded bolt always remains inside the
spindle and is not completely unscrewed from the spindle.
It is easier to adjust the angle of the seat when there
is nobody sitting in the wheelchair.
The figure shows the position of the spindle (1) for manual
seat angle adjustment.
5.5 Adjusting the seat depth
CAUTION!
Risk of damage to the power wheelchair if the
sideways and central seat depth adjustment is
not set identically
– When adjusting the seat depth, make sure to
set identical values sideways and at the spindle
or actuator for the backrest adjustment.
If necessary, you may shorten the seat depth by 130
mm using a seat depth adapter.
Tools:
•
Crosstip screwdriver
•
6 mm Allen key
30
1547067-H
Содержание Storm 4 Max
Страница 74: ...Notes ...
Страница 75: ...Notes ...
Страница 76: ...Notes ...
Страница 77: ...Notes ...