1.
Remove the seat cushion.
2.
Loosen the screws
A
and remove the seat plate.
3.
On both sides, remove the screws, washers, and cover
plates (1).
4.
Remove the screw (2).
5.
Adjust the spindle or actuator for the backrest
adjustment to the desired depth. In doing so, use the
labelling on the spindle or actuator as guidance.
6.
Retighten the screw (2).
7.
Adjust the bearing sheets (1) to the desired depth. In
doing so, use the labelling on the seat as guidance (2).
8.
Mount the cover plates and retighten the screws.
9.
Mount the seat plate and replace the seat cushion.
5.6 Adjusting Backrest
CAUTION!
Adjusting the seat tilt or the backrest angle
changes the geometry of the mobility device
and directly influences its dynamic stability!
– For details regarding dynamic stability,
negotiating gradients and obstacles and the
correct adjustment of seat tilt or backrest angle,
refer to
and
Driving up and down Gradients, page 45
5.6.1 Adjusting the backrest angle (Max seat)
Tools:
•
Crosstip screwdriver
1547067-H
31
Содержание Storm 4 Max
Страница 74: ...Notes ...
Страница 75: ...Notes ...
Страница 76: ...Notes ...
Страница 77: ...Notes ...