Invacare rea Focus, Руководство пользователя

Страница: 23 / 48

Accessories
Depth / angle adjustment
C
D
C
D
1. Loosen the handle D .
2. Loosen the screws C .
3. Adjust the depth and angle of the headrest.
4. Re-tighten the handle and the screws.
Positioning the headrest/neckrest to the front
This additional depth adjustment will move the headrest
another 7 cm forward.
A
C
D
E
A
C
D
You can also adjust the angle and depth by turning the
attachment for the headrest / neckrest.
1. Loosen the handwheel
A
.
2. Remove the headrest / neckrest.
3. Loosen the handle D .
4. Remove the screw and the handle.
5. Rotate the headrest / neckrest attachment pole including the
attachment
E
.
6. Return the headrest / neckrest to the attachment.
Note that the screw to the headrest / neckrest attachment
C
and the handle
D
must be mounted on the opposite side
due to the groves in the screw hole.
7. Return the headrest / neckrest to the attachment on the backrest.
8. Re-tighten the handle
D
.
5.5 Table tray
WARNING!
Risk of falling / injury
–
The table must never be used as a replacement for
the pelvic belt.
WARNING!
Risk of tipping / injury
– Max load on the table: 8 kg
CAUTION!
Risk of discomfort / minor bruises
–
Make sure that the elbows of the user are placed on
the table when pushing the wheelchair. If the elbows
protrudes from the table while pushing the wheelchair,
there is a risk of discomfort or minor bruises.
The table tray can be adjusted both in depth and width, the following
sections will show the different possibilities.
5.5.1 Mounting the attachment for table tray
1.
A
B
Mount the table attachment
A
with the attachment part facing
outwards. The plain surface
B
of the attachment should be
placed upwards when using the table on the thin armrests.
2.
A
C
To fit the table attachment
A
to the wide armrest, turn the
attachment around, the patterned surface
C
should now be
facing upwards.
5.5.2 Adjusting the depth of the table tray
1.
A
Open the safety lock for the depth adjustment
A
.
2.
B
Adjust the table holders B forwards or backwards to adjust to
the required depth.
3.
A
Close the table lock A again in order to lock the depth position.
1431580-B 23