Invacare rea Focus, Руководство пользователя

Страница: 21 / 48

Accessories
5 Accessories
5.1 Inlay cushion seat
A
B
1. To obtain a flat seat, place the inlay cushion
A
on the seat plate.
2. Fit the inlay cushion at the back of the seat plate
B
.
5.2 Trunk support Swing away
Height adjustment:
A
B
1. Loosen the screws A .
2. Slide the trunk support holder B up or down to the desired
position.
3. Re-tighten the screws.
The "swing-away" trunk support can be turned sidewards in
order to be out of the way when the user is moving in to or
out of the wheelchair.
CAUTION!
Risk of pinching
– The cover on the trunk support arm must always be
on when the chair is in use.
Angle adjustment:
A
B
1. The angle can be adjusted by loosening the screws B and bolts
A on the trunk support arm.
2. Hold with the allen key and tighten with the fixed spanner.
3. Remember to re-tighten the screws and bolts when the required
position is achieved.
5 mm allen key / 13 mm fixed spanner.
Depth adjustment:
C
D
1. Open the zip on the cover C .
2. Loosen the screws D .
3. Adjust the trunk support to the desired depth.
4. Re-tighten the screws
C
.
5. Close the zip on the cover.
Screwdriver
CAUTION!
Risk of pinching
–
Be careful not to pinch your fingers between the trunk
support and the wheel when propelling the chair..
5.3 Trunk support fixed arm
Height adjustment:
A
1. Loosen the screw
A
.
2. Adjust the attachment upwards or downwards to the desired
height.
3. Re-tighten the screw
A
.
1431580-B 21