Invacare rea Focus, Руководство пользователя

Страница: 18 / 48

Rea® Focus™
C
D
E
1. Loosen the screws
C
.
2. Turn the rear wheel clamps
E
around to position the rear wheel
behind the rear wheel bar D .
3. Re-tighten the screws C .
5 mm allen key
If the rear wheels are positioned in front of the rear wheel
bar
D , the wheelchair will become more unstable. If the rear
wheels are positioned further back, the stability will increase.
4.14.3 Camber
Depending on the rear wheel attachment, this product can
have 0� or 2� camber. To achieve 2� camber, the rear wheel
attachment needs to be changed.
E
C
F
1. Loosen the screws
C
.
2. Remove the rear wheel attachment clamps
E
.
3. Mount the camber rear wheel attachment F .
The 2� camber rear wheel attachment has a round
marking on the outside of the clamp. Make sure that
this marking is positioned upwards in order to obtain
the correct angle.
4. Tighten the screws.
5 mm allen key
4.15 Adjusting the castors
WARNING!
Risk of tipping
The castor might come off.
–
Make sure to check that the castors are securely
locked after each adjustment.
WARNING!
Safety risk
– Make sure that the castor housing is properly secured
after each adjustment.
When you have found the desired seat height and depth,
it’s important to check that the angle between the castor
attachment and surface is as close to 90° as possible, as it
may affect the wheelchairs propelling ability.
4.15.1 Castor angle
1.
A
B
Loosen the screw
A
.
2. Loosen the screw
B
two turns.
3.
C
Pull out the adjustment screw
C
.
4.
C
Turn the adjustment screw
C
to the desired angle position.
The castor can be angled in 5 different positions from
0° to 6°.
18 1431580-B