Invacare rea Focus, Руководство пользователя

Страница: 16 / 48

Rea® Focus™
The distance between the lowest part of the footrest and the
ground must be at least 40 mm.
4.10.2 Fixed legrest
Height adjustment
A
B
1. Loosen screw
A
with an Allen key.
Don't touch the upper screw
B
.
2. Adjust the legrest into a suitable height and the screw is caught
by one of the recesses on the legrest tube.
3. Re-tighten the screw.
The distance between the lowest part of the footrest and the
ground must be at least 40 mm.
4.11 Adjusting the angle adjustable foot
plates
The foot plates can be adjusted both in depth and angle, and can also
be folded-up.
A
1. Adjust the angle and the depth by loosening the screw
A
at the
foot plate attachment.
Tools: 5 mm Allen key
2. Adjust the foot plate to the correct position.
3. Re-tighten the screw.
Do not place anything on the foot plate when the screw is
loose.
4.12 Adjusting the one-piece footrest
WARNING!
Risk of trapping fingers
The fingers might get trapped between the foot plate and
the foot plate attachment.
– Be careful not to trap your fingers between the foot
plate and the foot plate attachment when folding it
down.
A
B
1. Adjust the angle and the depth by loosening the two screws
A
at the foot plate attachment.
Tool: 5 mm allen key
2. Adjust the foot plate to the correct position.
3. Re-tighten the screws.
The foot plate can be flipped up. Lift the foot plate
B
upwards as shown on the picture above.
Do not place anything on the foot plate when the screws
are loose.
4.13 Calf pads adjustment
A
B
C
The calf pads can be fitted in two different depth positions:
1. Swing the pad forwards.
2. Unscrew screw
A
.
Tools: 5 mm Allen key
3. Remove the large nut
C
on the reverse side and place it in the
second attachment hole.
4. Move the calf pad to the new position.
5. Secure it into place with the screw
A
.
The height of the calf pads can easily be adjusted by using
the handwheel
B .
4.14 Adjusting the rear wheels
WARNING!
Safety risk
– When you have fitted the wheels in the correct
position, make sure that the nuts and screws are
tightened securely with a torque of 40Nm. This is
important for you own safety.
WARNING!
Safety risk
– Always remember to adjust the brakes, when the
rearwheel position has been changed.
16 1431580-B